2th April, 2015
Placed an order of kess v2 fw4.036 from obdtool.co.uk €212.49 plus ==shipping.
I ordered this one:
7th April, 2015
Arrived today my fw4.036 Kess V2, They do not supply the bin or hex file with firmware, token free they tell me, no jlink here.
Installed today, tomorrow I will try if it works on kline and can
9th April, 2015
Tested today with
Peugeot 307 2.0 HDI edc15c2 kline - no id, no read
renault f9q 1.9dci edc16 can - no id, no read
I was advised: hw needs some update too....old bug like many kess units have.... so have a look at your parts....if you have not these parts, change them and it will work.
One poster post solution for example.
hardware repair solution :
W** - BCR112E
А6c - MMUN2113
6DW - BC817
Must be changed all of them, but this is a partial one : filters + capacitors is also needed N05B , cap 227 , 2907a , nfe6(filters)
an this is only the begining. Step by step based on the tests that i perform and pcs delivery from tme i will update you. I have full schematic original one . The one i am working on is not mine .
After checking the above PCB board, I thought missing oki chip on mine.
But an experienced technician confirmed:
Oki chip was primarily for Ford J1850 PWM, but this is now done directly from the NXP, so not fitted anymore.
Finally I solved, after a little soldering rework on nxp and esmt chip read ok iaw 4af and edc17cp02
This is from obd tool website technical support: Got KESS v2 fw4.036 from China and test Peugeot Renault
2.15V KESS V2 unlimited token version with firmware version V4.036 can read and write ECU via OBD2 port directly, ECU picture and connection manual coming with KESS V2 Ksuite software, much easy to use for customers. KESS V2 V2.15 master UK ECU chip tuning with multi-language works for bike and car with coverage of all major brands and protocols including Line, CAN, EDC17 and MED17. Here is the step-by-step instruction to help reset KESS V2 tokens.
1. Open "My Network Places" on the desktop and click "View network connections" on the left menu "Network Tasks".
Disable local area connection and wireless network connection; otherwise, you would get the interface damaged.
Close the interface.
2. Right click "My Computer" on the desktop to select "Manage".
"computer management"> "Device Manger" on the left menu> "PC-201411261510" (scroll down)> "universal serial bus controllers"> "USB device".
Close the interface.
3. Right click the compressed file"Tool" to extract on the desktop.
4. Open the extracted folder "Tool" and move all the three files to the desktop.
5. Cut the compressed file "KSuite_tok..." on the desk and copy it on the Local Disk (C:).
Close the two interfaces.
6. Delete the empty folder "Tool" and the compressed file "Tool" on the desktop.
7. Open "K-Suite" and choose OK in the ATTENZIONE interface and then close the following interface.
8. Re-name "Token1.tok" to "Token47.tok".
And then click "K10033818" and you can get a new compressed file "Kessv2-2.1..." on the desktop.
9. Prepare one 2G TF card and format the card.
10. Open the compressed file "Kessv2-2.1..." on the desktop and unzip it to the formatted 2G TF card--- disk (F:).
11.Delete the compressed file "Kessv2-2.1..." on the desktop after unzipping.
12. Re-name "Token47.tok" to "Token48.tok".
13. Copy "Token48.tok" on the desktop to the folder"Tokens".
Close the interface.
14. Open "My Computer"> "Local Disk (D:)", and then delete the folder "KSuite_tokens".
Extract the compressed file "KSuite_tokens" on disk (C:).
15. Open the extracted file "KSuite_tokens" on disk (C:).
16. Rename "K10033818.CFG" to "135K10033818.CFG".
17. Cut the renamed "135K10033818.CFG" and paste it on "C:\KSuite_tokens\KSuite\update".
Close the interfaces.
18. Open "K10033818" on the desktop and choose OK to continue.
19. Select KSuite direcory "my computer"> "Local Disk (C:)"> "KSuite_tokens"> "KSuite".
Then reset token count.
20. Choose OK to proceed.
Updating...
21. Select "Info" to read it. And then exit.
Complete resetting KESS V2 V2.15 master UK ECU chip tuning tokens.
NOTE:
Please connect KESS V2 with computer as the following pic shows when you are adding tokens. Do not connect KESS V2 to your vehicle when adding tokens!
This is from obd tool website technical support: How to reset tokens of KESS V2 V2.15 Master UK ECU Chip Tuning
KESS V2 Add tokens errors:
How to add free tokens for KESS V2 V2.13 Master UK ECU Chip Tuning with Unlimited Token Firmware V4.036 Multi-language? Download and follow this:
http://www.mediafire.com/download/42k0b2s877rwtr7/Kessv2++4.036++SE87-C++Tokens+Reset++Video+ok.zip
KESS V2 Master ECU tuning kit software V2.13 firmware V4.036 “No valid token file” problem & solution is provided here.
Problem:
KESS V2 V2.15 firmware V4.036 has only 9 tokens left. When try to reset token follow the video instruction, he stopped at ecu_tuner v2.4 procedure and the software displays error message:
“No valid token file” (error screenshots)
Possible reason:
Did not follow the video guide to rename the token files.
Solution:
First of all, check following:
Did you change a new TF card and format the TF card
Did you connect KESS v2 ecu tuning kit & TF card well
If not, then do it.
Follow the connection diagram to connect kess v2 TF card and laptop
Then follow video to go to this step.
Rename the token file. Follow these steps:
Rename “token47.tok” to “token48.tok”
Then copy “token48.tok” to “tokens” folder
There should be only ONE token.tok file on “tokens” folder
NOTE:
If you fail to rename “token2.tok to token10.tok”, then start from token11.tok, token12.tok, token13.tok…till token100.tok
The maximum is token100.tok. Then you should change another laptop, re-install system to reset tokens from token10.tok
Free download Kess V2 4.036 token reset video, Ksuite-tokens.zip and Kessv2-TF.zip
This is from obd tool website technical support: KESS V2 2.15 firmware 4.036 “No valid token file” (fixed)
China clone Alientech KESS V2 firmware V4.036 ECU tuning kit K-suite master version software has updated to new V2.15 with no token limitation. New K-suite V2.15 software can be free downloaded here:
KESS V2 OBD2 tuning kit vehicle list
Software version: K-suite V2.15
Top features:
2. No Checksum Error
4. Operating system: Windows XP/Windows 7
Newest clone Kess V2 2.15 with 4.036 Firmware K-suite 2.15 Master version add new protocols:
VAG Bosch EDC17C74 TC1793
KESSv2 - Car - 510
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300KCAN
Iveco Truck Bosch EDC17CV41
KESSv2 - Truck - 509
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K208
Cummins Ford Truck Continental CM 2220C
KESSv2 - Truck - 511
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K235
Cummins Generic Truck Continental CM2220
KESSv2 - Truck - 513
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K236
Cummins Agrale Truck Continental CM2220
KESSv2 - Truck - 515
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K236
Cummins Volkswagen Truck Continental CM2220
KESSv2 - Truck - 516
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K236
Case Tractor Bosch EDC17CV41
KESSv2 - Tractor - 512
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K208
Cummins Rostselmash Tractor Motorola CM850
KESSv2 - Tractor - 514
- Read: YES
- Write: YES
- Checksum Correction: YES
- Cable: 144300K226
Using tips:
4.If some ECU list options are grey, it is normal. KESS V2 will keep update new models. KESS V2 supports tractor till L15, cannot do newer L21, L22, L23 etc.
KESS V2 firmware 4.036 PCB board
How to connect Kess V2 to add tokens(Do not connect it to vehicles):
KESS V2 Boot Mode connection diagram
KESS V2 OBD connection diagram
This is from obd tool website technical support: KESS V2 K-suite V2.15 firmware 4.036 Free Download