Got KESS v2 fw4.036 from China and test Peugeot Renault

2th April, 2015

Placed an order of kess v2 fw4.036 from obdtool.co.uk €212.49 plus ==shipping.

I ordered this one:

http://www.eobdtool.co.uk/wholesale/kess-v2-master-obd-ecu-programmer.html

7th April, 2015

Arrived today my fw4.036 Kess V2, They do not supply the bin or hex file with firmware, token free they tell me, no jlink here.

Installed today, tomorrow I will try if it works on kline and can

9th April, 2015

Tested today with

Peugeot 307 2.0 HDI edc15c2 kline - no id, no read

renault f9q 1.9dci edc16 can - no id, no read

I was advised: hw needs some update too....old bug like many kess units have.... so have a look at your parts....if you have not these parts, change them and it will work.

One poster post solution for example.

hardware repair solution :

W** - BCR112E

А6c - MMUN2113

6DW - BC817

Must be changed all of them, but this is a partial one : filters + capacitors is also needed N05B , cap 227 , 2907a , nfe6(filters)

an this is only the begining. Step by step based on the tests that i perform and pcs delivery from tme i will update you. I have full schematic original one  . The one i am working on is not mine .

After checking the above PCB board, I thought missing oki chip on mine.

But an experienced technician confirmed:

Oki chip was primarily for Ford J1850 PWM, but this is now done directly from the NXP, so not fitted anymore.

Finally I solved, after a little soldering rework on nxp and esmt chip read ok iaw 4af and edc17cp02

This is from obd tool website technical support: Got KESS v2 fw4.036 from China and test Peugeot Renault

KESS V2 2.15 firmware 4.036 “No valid token file” (fixed)

KESS V2 Master ECU tuning kit software V2.13 firmware V4.036 “No valid token file” problem & solution is provided here.

Problem:

KESS V2 V2.15 firmware V4.036 has only 9 tokens left. When try to reset token follow the video instruction, he stopped at ecu_tuner v2.4 procedure and the software displays error message:

“No valid token file” (error screenshots)

Possible reason:

Did not follow the video guide to rename the token files.

Solution:

First of all, check following:

Did you change a new TF card and format the TF card

Did you connect KESS v2 ecu tuning kit & TF card well

If not, then do it.

Follow the connection diagram to connect kess v2 TF card and laptop

Then follow video to go to this step.

Rename the token file. Follow these steps:

Rename “token47.tok” to “token48.tok”

Then copy “token48.tok” to “tokens” folder

There should be only ONE token.tok file on “tokens” folder

NOTE:

If you fail to rename “token2.tok to token10.tok”, then start from token11.tok, token12.tok, token13.tok…till token100.tok

The maximum is token100.tok. Then you should change another laptop, re-install system to reset tokens from token10.tok

Free download Kess V2 4.036 token reset video, Ksuite-tokens.zip and Kessv2-TF.zip

https://mega.nz/#fm/25UkmDoY

This is from obd tool website technical support: KESS V2 2.15 firmware 4.036 “No valid token file” (fixed)