Optional solutions of Xentry [2221-45] No access authorization
Here are some optional useful solutions of how to fix 2016 SD connect c4 open shell error [2221-45] “No access authorization for XENTRY Diagnostics ...” some solutions are from eobdtool engineers, some from users sharing at forums.
Error message:
No access authorization code!
[2221-45] No access authorization for XENTRY Diagnostics was found on the server. You must contact the user help desk.
Here are some optional solutions, by professional engineers ans experienced user.
Solution I from eobdtool engineers:
Software version: Xentry 2016.7
Go to Local Disk C:/ Mercedes-Benz folder/ Xentry folder/ fusoko folder/eclipse folder/plugins
Then delete the specified file begin with “com.daimler.xentry.diagservice_1.6.0.201607....”
For Windows 7
Below is all the customer solutions. TRY ON YOUR OWN RISK.
Solution II from a user
Software version: Xentry 2016.05
In folder
C:\Program Files (x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins
Rename
com.daimler.xentry.diagservice_1.6.0.201603141505.jar
to
com.daimler.xentry.diagservice_1.6.0.201603141505.jarold
Then paste in
com.daimler.xentry.diagservice_1.6.0.201603141505.jar
from 2221 052016 folder
Solution III from another user
Software version: 05.2016 Xentry
Free download Xentry-2221-45-fix.rar:
(2 fix)
Solution IV with lots of thanks & likes in a forum
Software version: Xentry 2016.5
replace the file call com.daimler.xentry.diagservice_1.6.0.201605121225.jar in the folder
c:\program Files(x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins
with the attachment below
2016.05-Xentry-[2221-45]-Fix.rar:
https://mega.nz/#!11kxTZZA!uBWlUVOx7XzWai-T7eSPJt6V_lVhG2Pl5PI02oUNXUM
Wish this helps
This is from EOBDTOOL website technical support: How to solve Xentry [2221-45] No access authorization
OBDSTAR F100 is most powerful Key Programmer for Ford and Mazda, F100 is also an odometer tool for Ford, Mazda, Jaguar and Land Rover. Here is the OBDSTAR F100 all car list of Ford Mazda Jaguar Land Rover for your reference.
You can download OBDSTAR F100 all car list, check this link:
Asked question about OBDSTAR F100 on eobdtool.co.uk website, share here with you.
Q: Are the Models covered by this F100 only US Ford and China Ford? I cannot make out what would work for European Fords from the OBDSTAR site, Specially Fiesta, focus, Edge, Mondeo and cx5 from Mazda?
A: OBDSTAR F100 Ford car is only listed US Ford and China Ford, pay attention that European Ford is the same as China Ford.
Of course, OBDSTAR F100 can do Ford Fiesta, Focus, Edge, Mondeo and Mazda CX5.
Where to get OBDSTAR F100 Mazda/Ford No Need Pin Code Key Programmer?
Only for €152.99 original OBDSTAR make
Opel Hybrid ECU programmer (carprog v8.21 and v9.31 online):
OPEL login reader from motor hybrid ECU. Works by OBDII connector using cable
A1, or removed from car using cable A15. On-table connection wiring diagram you
can find in user manual.
This CarProg Opel ECU reader you can use in these cases:
• use it like Opel security code reader by OBDII for transponder key
programming. In this case you don't need call dealer for get security code or
remove immobilizer to read it manually. For key programming use any key
learning tool - TECH 2, AD100 OP-COM or any other;
• use it for used motor ECU repair, reset Engine Control Module and
programming. ECU security code is necessary to set back the Engine Control
Module to its factory default state. Prior to replace, you have to reset it back to
its factory default state. In this way, you can install it into another car. With
TECH2 or other equipment you can do this work, but always you need used
motor ECU security code (you can read it with CarProg) and car immobiliser
security code (remove immobiliser and use TMS370 programmer to read it).
Each factory default state Engine ECU has some limited running time, without
immobiliser (max 10 attempts);
Supported cars:
Bosch ME 1.5.5
Agila 1.0, 1.2 2000-2005
Astra 1.2, 1.6, 1998-2001
2.0
Corsa 1.0, 1.2, 1997-2000
1.4
Corsa 1.0, 1.2 2000-2005
Tigra 1.4, 1.6 1997-2000
Zafira 2.0 2002-2003
See pictures:
1. SIMTEC 71 and SIMTEC 71.1 ECU connection on-table diagram:
2. BOSCH ME1.55 ECU connection on-table diagram:
3. DELCO PETROL HSFI 2.x and DIESEL 1.7DT ECU connection on-table
diagram:
4. DELCO PETROL HSFI - C ECU
This is from EOBDTOOL website technical support: CarProg ECU Tool Opel Hybrid ECU programmer