CarProg ECU Tool Opel Hybrid ECU programmer

Opel Hybrid ECU programmer (carprog v8.21 and v9.31 online):

OPEL login reader from motor hybrid ECU. Works by OBDII connector using cable

A1, or removed from car using cable A15. On-table connection wiring diagram you

can find in user manual.

This CarProg Opel ECU reader you can use in these cases:

• use it like Opel security code reader by OBDII for transponder key

programming. In this case you don't need call dealer for get security code or

remove immobilizer to read it manually. For key programming use any key

learning tool - TECH 2, AD100 OP-COM or any other;

• use it for used motor ECU repair, reset Engine Control Module and

programming. ECU security code is necessary to set back the Engine Control

Module to its factory default state. Prior to replace, you have to reset it back to

its factory default state. In this way, you can install it into another car. With

TECH2 or other equipment you can do this work, but always you need used

motor ECU security code (you can read it with CarProg) and car immobiliser

security code (remove immobiliser and use TMS370 programmer to read it).

Each factory default state Engine ECU has some limited running time, without

immobiliser (max 10 attempts);

Supported cars:

Bosch ME 1.5.5

Agila 1.0, 1.2 2000-2005

Astra 1.2, 1.6, 1998-2001

2.0

Corsa 1.0, 1.2, 1997-2000

1.4

Corsa 1.0, 1.2 2000-2005

Tigra 1.4, 1.6 1997-2000

Zafira 2.0 2002-2003

See pictures:

1. SIMTEC 71 and SIMTEC 71.1 ECU connection on-table diagram:

2. BOSCH ME1.55 ECU connection on-table diagram:

3. DELCO PETROL HSFI 2.x and DIESEL 1.7DT ECU connection on-table

diagram:

4. DELCO PETROL HSFI - C ECU

This is from EOBDTOOL website technical support: CarProg ECU Tool Opel Hybrid ECU programmer