Enable Mitsubishi hidden functions using Lexia 3 PP2000 diagnostic tool

I would never have known that there were "hidden" options in my 2008 Outlander Sport until I got a Lexia 3 pp2000 cable, although it beats me why they wouldn't enable them in the factory and advertise as "features".

The Lexia 3 PP2000 diagnostic tool came with a CD. I noticed that the CD I got with this device had something called "diagbox".

Finally got my device hooked up to my car today. I spent a whole day trying to get XP installed on my DVD, getting the software to work properly, etc.

I enabled the speed-based auto locking (love it) in parking feature using PP2000 and turned off the

annoying seatbelt warning chime. It annoys the heck out of me when I drive without a seatbelt (on private

property, if you're wondering). This evening I saw another option called "comfort flashing" in the PP2000

customer options. This is the feature that lets you slightly tap the turn signal stalk and have it flash 3

times. According to the car manual, the number of flashes can be adjusted usingMMCS. I looked around

but couldn't find the place where I can change the number of flashes (I want to bump mine up from 3 to

5). The option in PP2000 was only to active/deactivate the feature, and there was nothing there that let

me change the parameters of it.

I also want to have both my DRLs and Fog lamps in the same assembly but have not figure out how to do it

yet. Anyways, given the convenience and cheap price, the tool would be worth it.

Lexia-3 V48 PP2000 V25 Citroen/Peugeot Diagnostic Support Peugeot 307 Avec Diagbox V7.57:

http://www.eobdtool.co.uk/wholesale/best-quality-lexia-3citroen-peugeot-pp2000.html

This is from obd tool website technical support: Enable Mitsubishi hidden functions using Lexia 3 PP2000 diagnostic tool

Citroen Peugeot Lexia 3 PP2000 with 100% 921815C chip

Obd tools site (obdtool.co.uk) has extracted PSA Citroen and Peugeot Leixa 3 PP2000 XS Evolution Diagbox diagnostic interface with 100% original 921815C full chip that works perfectly on Peugeot 307, 407 and Citroen C5.

Software version: 

Lexia-3 V48,

Peugeot Planet 2000 PP2000 V25,

Diagbox 7.57

Software languages: 

English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai...

PSA Lexia3 Interface firmware version and chip:

How to check if the LEXIA 3 is original?

Lexia-3 PCB edge is golden. Double PCB

Lexia-3 replays are 12pcs, which are 4.5V, it is more stable.

Lexia3 PCB has 7pcs optocouplers , which are 100% original and new

2pcs Optocouplers on Lexia 3 PP2000

Firmware: Reference Serial 921815 C/

This is from obd tool website technical support: Citroen Peugeot Lexia 3 PP2000 with 100% 921815C chip

With diagbox V7.57 Series 921815C / Firmware Lexia 3 V48 PP2000 v25

To Lexia 3 PP2000 users,Obd tools website newly releases a new kind of best quality Lexia 3 PP2000 built-in original chip 921815C / firmware and can perform very well with Peugeot 307. The new lexia 3 pp2000 will demand those who want to get real picky and go for quality chips and check for NEC chips as in something like this:

http://www.eobdtool.co.uk/wholesale/best-quality-lexia-3citroen-peugeot-pp2000.html

obdtool.co.uk sells €75, and shipping cost depends on your destination.

This is newest Lexia-3 PP2000 package.

Two pieces of PCB board pictures with marked 921815C / firmware position to prove the best quality of Lexia 3 PP2000.

More detailed information on newest Lexia-3 PP2000

Firmware: 921815C /, best full chip

Software: V7 Date diagbox

Update: Once obdtoolshop.co.uk is available with newest software download link, you will be informed to download.

Besides, the newest one package is different from the older version as follows.

http://www.eobdtool.co.uk/wholesale/pp2000-lexia-3-citroen-peugeot-diagnostic-tool.html

This is from obd tool website technical support: With diagbox V7.57 Series 921815C / Firmware Lexia 3 V48 PP2000 v25

PP2000 fix Engine Management Light (EML) on for Peugeot 206

This post starts with Peugeot 406 problem that Engine Management Light (EML) on, then use Lexia 3 PP2000 Peugeot diagnostic tool to read out the fault code, according to the fault code description, the technician finally solved the problem.

Let’s go

Car model and year:

Peugeot 206 Bella, a 1.4 16V Sport in Moonstone Blue

Car problem:

EML is coming on, showing anti-pollution fault, it'll stay there for about 3 days and then disappear for about a week, then back on for 3 days.

Tool to use:

I use PP2000 Peugeot diagnostic tool to read out codes, I bought from obdtoolshop.co.uk

http://www.eobdtool.co.uk/wholesale/best-quality-lexia-3citroen-peugeot-pp2000.html

Fault code and description

P0170 - Fuel Trim Bank 1

P0011 - A Camshaft Position - Timing Over-Advanced or System Performance Bank 1
P0012 - A Camshaft Position - Timing Over-Advanced or System Performance Bank 1

Advice:

I think you should remove the vvt solenoid, easy enough to do and just give it a good clean and tell us what the condition is like before you clean it

Solved:

It was a faulty Pre-cat Lambda.
Fuel Trim Bank 1 = Pre-cat Lambda sensor

This is from obd tool website technical support:   PP2000 fix Engine Management Light (EML) on for Peugeot 206

Question for the Lexia-3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.57

10 Highlights to get Lexia 3 V48 pp2000 v25 diagbox v7.57: 

1. Software Version:
Lexia3  Software: V48
PP2000 Software: V25
Diagbox : V7.57
2. Language List: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3. Update via CD.
4. Support cars from 1995 to 2012.
5. Support Windows XP.
6. PP2000/LEXIA-3 Interface works for both Citroen and Peugeot! Support Peugeot 307
7. Diagbox V7.49 Software free provide.
8. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
9. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
10. PP2000 have 2pcs Optocouplers.

Lexia 3 V48 FAQ:

Q1: when install Lexia-3 Diagbox software, error message reading “ERROR Lexia: error during installation of Lexia. You have to reactivate to restart the installation.”

A1: Your computer system isn’t compatible with the software; please use Windows XP operation system.

Q2: Does Lexia test the tire pressure?
A2: If your car has Tire pressure control unit, lexia-3 can test the tire pressure.

Q: After plug the USB cable to the Lexia 3 (item NO. SP08-C), the indicator lights flash and off, off and flash, not stable.
A: Is the USB cable also connected with the car? Check whether the USB cable is not connected well with the computer.
Q: yes, I do. I try on several cars, does not work either.
A: try to use another USB cable, if it will not work either, contact us, maybe it needs to return to us for check.

Q4: Does Lexia-3 work with Peugeot 308?
A4: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.

Q5: Can Lexia 3 (item NO: SP08-C) work with Peugeot Partner Tepee B9 2011 diesel car?
A5: this car model is included in the supported carlist, so far no users feedback this car is not supported.

Q6: is PPS compatible with Peugeot 307 HDI?
A6: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.

Q7: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A7: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested it.

Q8: Would you please store the software lexia3 and diagbox6.01 in one CD?
A8: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.

Q9: During the installation of Lexia-3, I got ERROR reading “Failure of the activation (error 20).

A9: we are so sorry; we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD. Or you can contact me for the software download link for you to use.

Q10: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with the car, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?
A10: Try to install Lexia-3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, please you watch the video in the CD, the video shows you how to step-by-step install the software.

Q11: It can do C5 cars?
A11: It is not stable for c5 cars, you'd better not choose this for c5.

Q12: It can be updated?
A12: It is updated by CD.

Q13: I have installed it on windows 7 system, but it cannot work, what is the problem?
A13: It can only be installed on XP system; you need to change another computer with XP system.

This is from obd tool website technical support: Question for the Lexia-3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.57